REQUIRED TOOLS
- Screwdriver T10 Torx Head
- Screwdriver T25 Torx Head
- Allen key #5
REQUIRED TOOLS
CHECK
Recommended check based 250 cycles/day
| Ref. N° | Description | Comment | Months | |||
| 6 | 12 | 18 | 24 | |||
| / | Pitchers | Check for damages on paint & RFID-tag | X | X | ||
| 10411 | Load cell | Check calibration | X | X | ||
| 10508 | Cool Touch steam nozzle | Positioning & clean | X | X | X | X |
| 11105 | Steam wand | Check calibration | X | X | X | X |
| 11895 | Steam valve | Check valve | X | X | X | X |
| 12200 12597 13067 | Boiler | Check heating function | X | X | ||
| 12207 | Drain valve | Check valve | X | X | X | X |
| 12675 | Temperature sensor | Check temperature respons | X | X | X | X |
REPLACEMENT
Recommended preventive maintenance based 250 cycles/day
| Ref. N° | Description | Months | |
| 12 (Ref 13046) | 24 (Ref 13048) | ||
| 10508 | Cool touch steam nozzle + food grade O-ring | (X) | |
| 11895 | Steam valve (Jack) | X | |
| 12244 | Hose 12mm silicon - L=700mm (steam valve to steam pipe) | X | X |
| 12523 | Hose 8mm - L=40mm (steam valve) | X | |
| 12887 | Hose 6mm - L=480mm (overP valve to middle T) | X | X |
| 12889 | Hose 8mm - L=95mm (overP valve) | X | X |
| 12900 | Anti-vacuum + over pressure valve - 8mm pushfit | X | X |