BEFORE YOU START



PROCEDURE

  • Turn on the Perfect Moose Greg.

  • Select the required language.

  • Set the amount of condensation water and the length of the steam connection hose. Perfect Moose uses these values to calculate the maximum purge duration before a steaming cycle.

  • Measure the steam connection hose. Enter the length of the steam connection hose in cm. The total uncut length of the steam connection hose is 150 cm.
  • Check the calculated Purge max value. Purge max is the maximum time that Perfect Moose purges condensation water from the hoses before a steaming cycle. This value is displayed in milliseconds.
  • Select the functions.
  • Perfect Moose will flush steam through the nozzle to clean the nozzle after a steaming cycle.
    • AUTO: Perfect Moose releases a short burst of steam when the steam wand reaches its top position.
    • MANUAL: Remove the pitcher from the pitcher holder and press the touchscreen to release a short burst of steam.
  • Hot skip button allows the user to overrule the error when the liquid is too warm to start a steaming cycle.
    • ON: The maximum allowed starting temperature can be overruled.
    • OFF: The maximum allowed starting temperature cannot be overruled.
  • Adjust recipe feature allows the user to reprogram the texture and end temperature of a pitcher.
    • ON: The texture and end temperature of a pitcher can be reprogrammed.
    • OFF: The texture and end temperature of a pitcher is locked.

  • Select whether the extra hot and extra cold buttons are displayed.
  • Select the measurement units:
    • Temperature: °C or °F
    • Liquid amount: ml or oz

  • Select the sound settings.
    • ERROR: Sound when an error code is triggered.
    • STEAMING CYCLE END: Sound when the steam wand reaches the top after a steaming cycle.
    • TIME TO FLUSH: Sound when the flush is not performed within 10 seconds after a steaming cycle.

  • The Perfect Moose Greg is ready to steam.