REQUIRED TOOLS
- Screwdriver T10 Torx head
- Screwdriver T25 Torx head
- Allen key #5
REQUIRED PARTS
BEFORE YOU START
|
|
PROCEDURE
- Remove the touchscreen from the main-assembly by pulling on the 2 clips on the leftside of the screenholder.
- Gently unlug the screen cable from the touchscreen.
- Place the new touchscreen in holder back on the main-assembly and connect the screencable
- Upload the screen software.
- Close the Greg housing, attention check the alignment of the touchscreen in the housing!
HOW TO ALIGN THE TOUCHSCREEN IN THE HOUSING?
You can check the video on how to align the touchscreen in the housing by clicking HERE.